BackBackNextNext
Eye and Face Protection
The CSA Standards classify eye and face protection into seven classes. Here are the most common in our industry: (Refer to your provincial OH&S Code for further info on the other classes).

Use the a Hazard Assessment (FLHA) to determine proper PPE for a specific job task.

C.S.A. / A.N.S.I. approved eyewear must be worn when the nature of the work is such that it may result in injury to the eyes or face. Some examples are:
  • Machining, Boring, Milling
  • Grinding, Cutting or Welding
  • Handling chemicals
  • Pressure Testing
  • Phosphating
  1. Spectacles (safety glasses)

    • Spectacles for impact protection with side protection.
    • Spectacles for impact and radiation protection with side protection.
  2. Goggles

    • Goggles for impact protection with direct ventilation.
    • Goggles for impact, dust and splash protection; non-ventilated and indirectly ventilated.
    • Goggles are Class 2A or 2B goggles with radiation protection.
  3. Face shields

    • Face shields offer impact and splash protection.
    • Face shields offer radiation protection.
    • Face shields are intended for high-heat applications.


    Basic eye protection should always be worn with face shields. Face shields alone are not enough to fully protect the eyes from work hazards. When eye and face protection is required, consult the Safety department, MSDS, or safety supplier for additional information.
  4. Prescription Eye Protection

    Even if prescription eyewear is made with "impact resistant" plastic lenses, the eyewear still does not protect the eyes like safety eyewear.