Please read the following Safe Work Practice.
Operation of Electric and Hand Tools
1. Electrical tools must have 3 wire (grounding) cord and plug, excluding double insulated tools.
2. Grinder discs, buffers and stones to be used only for designed application and at rated speed.
3. Stationary grinders must have properly adjusted tool rests and stones to be properly dressed.
4. Angle grinders to have Original Equipment Manufacturer (O.E.M.) guard.
5. On/off switches must be functional and positioned so Operator has access.
6. Accessories can only be used that are designed for use with the tools specified.
7. Saw blades must be designed for the product being cut and at the rated speed, O.E.M. guards must be in place and functional.
8. Chisels, punches, hammer, wrenches, etc. to have all burrs ground from striking area.
9. Chisels, punches, screwdrivers, etc. to have tips properly dressed.
10. Cracked a/o splintered handles need to be replaced.
11. All tools must be cleaned after use and repairs made before being properly stored.
12. Tools to be used for designed purpose only.
13. Repairs to tools must be performed by qualified personnel, using O.E.M. parts or equivalent.
Operation of Air tools
- 1. Regularly inspect tools and hoses before using.
2. Wear suitable clothing and personal protective equipment.
3. Get assistance before lifting or moving heavy objects.
4. Practice good housekeeping.
5. Keep loose fitting clothing away from rotating equipment.
6. Bleed air before disconnecting hoses.
7. Do not use an air tool for any purpose other than what it is intended for.
8. Maintain the equipment as per Manufactures specification.