1. Ensure WHMIS labels are attached and visible.
2. Cylinders are transported and secured in an upright position in a ventilated area.
3. Cylinders will not be stored inside buildings, or carried in closed canopies, vehicles, and tool vans.
4. Regulator to be installed on cylinder prior to use.
5. When checking for leaks use a soapy water solution.
6. When not in use, cylinder to be secured in upright position, valve closed and regulator removed.
7. Cylinders should not be used if shoulder label/stamp is not legible.
8. When not in use, a plug or cap must be used to seal opening of valve.
9. Ensure cylinders in storage or transit must be equipped with valve cap or collar and regulator removed.
10. Cylinder not to be painted over in any fashion.
